Transtools Kitchen Worktop Router Jig 900mm with Router Cutters and Guide Pins

• Transtools worktop jig cuts 400mm, 500mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops.
• Cuts right and left 45 degrees joints.
• Cuts right and left standard 90 degrees joints.
• These jigs can be used for its kitchen, bathroom, bedroom or shop worktop fitting.
• Transtools jigs are made of hard wearing medium density laminated fibreboard (MDF). 
• Supplied with four nylon location pegs.
• Supplied complete with router cutters and guide pins.
• Transtools Worktop Jig Instructions

Please Note

This item MUST be inspected on delivery for any damage prior to signature. Transtools cannot be held responsible for any damage if the item has been signed for.